Alexey Koposov

• Dai, Tian; Kouoi, Xavier; Reynaud, Marine; Wagemaker, Marnix; Valldor, Björn Martin & Famprikis, Theodosios [Show all 7 contributors for this article] (2024). Antiperovskite active materials for metal-ion batteries: Expected advantages, limitations, and perspectives. Energy Storage Materials. ISSN 2405-8297. 68. doi: 10.1016/j.ensm.2024.103363. Full text in Research Archive
• Brennhagen, Anders; Skautvedt, Casper; Cavallo, Carmen; Wragg, David Stephen; Koposov, Alexey & Sjåstad, Anja Olafsen [Show all 7 contributors for this article] (2024). Unraveling the (De)sodiation Mechanisms of BiFeO<inf>3</inf> at a High Rate with Operando XRD. ACS Applied Materials & Interfaces. ISSN 1944-8244. 16(10), p. 12428–12436. doi: 10.1021/acsami.3c17296. Full text in Research Archive Show summary

  Development of new anode materials for Na-ion batteries strongly depends on a detailed understanding of their cycling mechanism. Due to instrumental limitations, the majority of mechanistic studies focus on operando materials’ characterization at low cycling rates. In this work, we evaluate and compare the (de)sodiation mechanisms of BiFeO3 in Na-ion batteries at different current densities using operando X-ray diffraction (XRD) and ex situ X-ray absorption spectroscopy (XAS). BiFeO3 is a conversion-alloying anode material with a high initial sodiation capacity of ∼600 mAh g–1, when cycled at 0.1 A g–1. It does not change its performance or cycling mechanism, except for minor losses in capacity, when the current density is increased to 1 A g–1. In addition, operando XRD characterization carried out over multiple cycles shows that the Bi ⇋ NaBi (de)alloying reaction and the oxidation of Bi at the interface with the Na–Fe–O matrix are detrimental for cycling stability. The isolated NaBi ⇋ Na3Bi reaction is less damaging to the cycling stability of the material.

• Park, Heesoo; Wragg, David Stephen & Koposov, Alexey (2024). Replica exchange molecular dynamics for Li-intercalation in graphite: a new solution for an old problem. Chemical Science. ISSN 2041-6520. doi: 10.1039/d3sc06107h. Full text in Research Archive Show summary

  Li intercalation and graphite stacking have been extensively studied because of the importance of graphite in commercial Li-ion batteries. Despite this attention, there are still questions about the atomistic structures of the intermediate states that exist during lithiation, especially when phase dynamics cause a disordered Li distribution. The Li migration event (diffusion coefficient of 10−5 nm2 ns−1) makes it difficult to explore the various Li-intercalation configurations in conventional molecular dynamics (MD) simulations with an affordable simulation timescale. To overcome these limitations, we conducted a comprehensive study using replica-exchange molecular dynamics (REMD) in combination with the ReaxFF force field. This approach allowed us to study the behavior of Li-intercalated graphite from any starting arrangement of Li at any value of x in LixC6. Our focus was on analyzing the energetic favorability differences between the relaxed structures. We rationalized the trends in formation energy on the basis of observed structural features, identifying three main structural features that cooperatively control Li rearrangement in graphite: Li distribution, graphite stacking mode and gallery height (graphene layer spacing). We also observed a tendency for clustering of Li, which could lead to dynamic local structures that approximate the staging models used to explain intercalation into graphite.

• Wragg, David Stephen; Skautvedt, Casper; Brennhagen, Anders; Geiss, Carina; Checchia, Stefano & Koposov, Alexey (2023). Tracking Lithiation of Si-Based Anodes in Real Time by Total Scattering Computed Tomography. Journal of Physical Chemistry C. ISSN 1932-7447. 127(48), p. 23149–23155. doi: 10.1021/acs.jpcc.3c06414. Full text in Research Archive

View all works in Cristin

• Wragg, David Stephen; Koposov, Alexey; Thiagarajan, Abilash Kanish; Chernyshov, Dmitry; Brennhagen, Anders & Slawinski, Wojciech Andrzej [Show all 7 contributors for this article] (2024). Structural Origins of Graphite Staging.
• Wragg, David Stephen; Koposov, Alexey; Ulvestad, Asbjørn; Skare, Marte Orderud; Skautvedt, Casper & Geiss, Carina [Show all 7 contributors for this article] (2024). Where’s my silicon battery? Amorphous battery materials and how to study them.
• Ostrander, John; Wragg, David Stephen; Vie, Preben Joakim Svela; Wind, Julia & Koposov, Alexey (2024). Identifying key degradation patterns as a function of ageing temperature: A post-mortem study.
• Brennhagen, Anders; Skurtveit, Amalie; Skautvedt, Casper; Cavallo, Carmen; Wragg, David Stephen & Vajeeston, Ponniah [Show all 9 contributors for this article] (2024). Revealing the (de)sodiation mechanisms of Bi-metallates through operando X-ray characterisation. Show summary

  Na-ion batteries is entering the battery market as an alternative to Li-ion batteries. To improve their overall performance it is crucial to develop new types of anode materials with high capacity and long cycle life. Materials combing conversion and alloying mechanisms (CAMs) are promising anodes with their high capacity, but obtaining good cycling stability is still challenging. A comprehensive understanding of the cycling and degradation mechanism of these materials is crucial to improve their performance. Bi-metallates, with a general formula of Bi−TM−O (TM = transition metal) is a group of ternary CAMs. Their general cycling mechanism consists of an irreversible conversion reaction forming nanoparticles of Bi-metal embedded in a Na-TM-O matrix during the first sodiation, followed by a reversible two-step alloying reaction forming Na3Bi with NaBi as an intermediate phase. In this work, we have used operando X-ray diffraction (XRD), pair distribution function (PDF) analysis and X-ray absorption spectroscopy (XAS) to investigate the desodiation mechanisms of Bi2MoO6 and BiFeO3. Through this work, we discovered that Bi2MoO6 forms the cubic version of Na3Bi (c-Na3Bi) while BiFeO3 forms hexagonal Na3Bi (h-Na3Bi) in addition to c-Na3Bi during the first sodiation. In the desodiated state, the Bi-particles are partially oxidised, while still maintaining the Bi-metal structure, indicating that it is only the Bi atoms at the interface between the Bi nanoparticles and the Na−TM−O matrix that is oxidised. During cycling the NaxBi particles grow larger thus increasing the distance between them and increasing the impedance in the material. This is considered to be the main driver for the capacity degradation that was observed during the first 20 cycles. The operando XAS data also revealed that Mo6+ in Bi2MoO6 does not change oxidation state during cycling, but changes coordination between tetrahedral and distorted octahedral coordination during cycling. The cycling and degradation mechanisms of Bi2MoO6 is summarised in Figure 1.

• Ostrander, John; Vie, Preben Joakim Svela; Wragg, David Stephen; Koposov, Alexey; Lian, Torleif & Wind, Julia [Show all 7 contributors for this article] (2023). Post-Mortem Analysis of a Commercial Li-Ion Pouch Cell and the Effects of Aging on Overall Battery State of Health (SOH).
• Thiagarajan, Abilash Kanish; Brennhagen, Anders; Wragg, David Stephen & Koposov, Alexey (2023). Structural changes in graphite-based anodes of Li-ion batteries elucidated through operando XRD. Kjemisk Institutt. Show summary

  Lithium-ion batteries (LIBs) with graphite-based anodes dominate the battery market around the world and have been studied extensively for the past decades, but the structural changes during cycling are still not fully understood. In this work, we used galvanostatic cycling (GC) to characterize the electrochemical performance of graphite samples in LIB. We also attempted to achieve stable capacities over hundreds of cycles to monitor the effect of long-term cycling on the mechanisms of graphite, with limited success. The fabricated coin cells experienced poor capacity retention across all graphite samples and some abnormal capacity increases that had not been observed previously. We noticed that electrolytes containing FEC made a noticeable change to the electrochemical performance as it resulted in irregular cycling, but also better capacity retention. Operando X-ray diffraction is a powerful technique to understand structural changes. We looked at multiple graphite reflections, mainly 002, 100, 101, 102 and 004, and observed that the expansion of the structure is not only 2 dimensions but all 3 dimensions as the interlayer distance and graphene layers expands during lithiation. We also monitored this expansion of graphene layers with pair distribution function (PDF) as the three C-C distances in hexagonal carbon rings, 1.41 Å, 2.41 Å and 2.85 Å, changed lengths at different points during lithiation and delithiation. We looked at diffraction peaks during lithiation and delithiation to study the mechanisms and observed that they were different. Lithiation showed solid solution like behavior indicating disordered intermediate phases, while delithiation showed two-phase transition indicating ordered structures. In this work we have used Operando X-ray diffraction to show that the structural changes graphite undergoes during cycling, transition from graphite to LiC6, is not specific to each graphite sample and the structural changes depend on the condition of the material. Pristine graphite samples transitioned fully to LiC6 during cycling with C-rate of C/6, but only LiC12 when a higher C-rate of C/2 was used. Graphite electrodes cut from commercial pouch cells that had cycled many hundreds of electrochemical cycles were able to transition to LiC6 during C/20, but only LiC12 during C/6, indicating an “ageing” mechanism.

View all works in Cristin